Wednesday, September 14, 2011

Headlight removal?

I have a 03 kia sedona and I cant figure out how to remove the headlight to change the bulb. does anybody know?? thanksHeadlight removal?if u open the hood look at either light u can see theres a rubber bung which covers the wires so they dont get wet...now pull that off ( its a tight gap to move your hand though..if u dont mind a scratch that is),now you will see the back of the bulb now theres a metal clip holding it inplace..undo that clip(it swings towards you, u'll see what i mean)you then can feel it come loose an u can remove (remember wen putting in ur new bulb..dont touch the glass on the new bulb..it should come right out with a a few tight turns..then reverse the process wen installing new bulb...10 mins it took me to do the 2 headlights...o yea, u can look in to the headlight when ur fitting back in,just to make sure its the right way up..hope that helpsHeadlight removal?its in a bracket you have to unscrew some bolts, i believe you will need a 10mm size tool and pull it out which its connected to a wire, make sure when you put the new one in that you screw it in level so the light hits the right part of the road.. on most new headlights there is a little bubble in a tube and it has to be in the middle showing its lined up and theres a spring in the back thats also holding it in place.Headlight removal?the bulb is removed from the backside. Do Not remove any screws. The ring that retains the bulb is held in place by a spring. Do Not remove any screws unhook the spring with your fingersHeadlight removal?lift the hood and look at back of head light,should be a round knob with wires sticking out the center,turn counter clockwise to remove, remove old halogen bulb,to install new use paper towel,do not touch glass on new bulb with bare hands,as will cause bulb to burn out sooner than suppose to, some cars are a little different,but this procedure is the normHeadlight removal?open the hood and pull the cord