Friday, June 3, 2011

Could someone please advise me on how to change a bulb in the headlight of my Audi A4 2001?

undo the couple hex heads that hold the head light assembly in and pull it out then disconect the wiring (quick disconects) then open the plastic compartment and theres a wire that holds the bulb down undo that and pull the bulb out its the same for high and low then re-assembleCould someone please advise me on how to change a bulb in the headlight of my Audi A4 2001?http://www.car-stuff.com/headlights.htm

This site has real live help 24/7. On the top of the screen you'll see:





Car Stuff then 24/7 LIVE HELP If you click on the 24/7 live help, that's what you'll get. I couldn't find the car's manual online. If you have the car manual for your automobile, it will tell you how to replace the bulbs and which kind to buy. It's not hard to do if you have the manual in front of you. I've changed my own once when they needed new bulbs. (But I drive a different make and model.)Could someone please advise me on how to change a bulb in the headlight of my Audi A4 2001?I have an Audi A4 2000. If they are any thing alike, then you can do the headlight bulb change without any tools.



On the passenger side headlight, you have to remove the air intake plastic parts to get to the head lamps. Behind the broken headlight there is a metal clip holding close the cap to the bulb area. And another metal clip inside holding the bulb down. Be careful removing the metal clip to the plastic cap. You can break it (plastic cap) if you force the metal clip.



Once you get bulb out, be careful replacing the new bulb. Don't touch the new bulb with you skin. Oil will burn out the glass surface. When removing the bulb, note the position of the bulb and the connector (in relation to the housing). It can be force in wrong. Then your headlight would be misaligned (pointing too high or low).



Good Luck.

How to change a 2003 toyota corolla headlight bulb? How much is it?

It's the headlight bulb on the driver side (right side). Thanks.How to change a 2003 toyota corolla headlight bulb? How much is it?the cost for changing it is the price for the bulb.

to change it: if you still have that intake pipe that curves up by the battery, try going in from the right corner of the battery closes to you. if not then reach in from the left corner of battery closes to you. if you can't fit your hand in there then you have to remove the battery. removing it would make it easier to get to. it also resets your radio and clock in the car. use size 10mm socket(deep socket prefer) or wrench to remove battery clamp. there is two(2) teeth like clip on the harness that needs to be pull back a little to unplug the harness. once u get the harness off then simply turn the bulb one way to loosen it. the bulb can be remove first also. I prefer unplugging the harness first. do these steps in reverse to put in the new bulb and battery back in.How to change a 2003 toyota corolla headlight bulb? How much is it?Be sure not to touch the bulb except on the end. Use a cloth if necessary. The trace bit of oil on your fingers will cause it to burn out much too quickly!

Report Abuse

  • bird
  • its wrong that
  • Does any one know how to change the headlight bulbs on a mitsubishi pajero?

    if remember correctly, you have to open from inside the bonnet. take off the plastic panels which are press screwd and then you can just about see the four screws. take them off and you can see the bulb.Does any one know how to change the headlight bulbs on a mitsubishi pajero?YOU CAN GET A OWNERS GUID TO ASSIST YOU.Does any one know how to change the headlight bulbs on a mitsubishi pajero?Open the bonnet, nearside front bulb is behind the radiator overflow bottle which should lift out easily (without tools) once it is removed then the bulb is accessible, unplug the wiring, and remove the dust cover, then unclip the bulb retainer and remove the bulb, i cannot remember if there is anything in the way of the offside but if there is it should be reasonably easy to remove and bulb changing is the same as nearside.

    The bulbs only sit correctly one way so make sure you fit them correctly or you'll have poor light from them.

    Hope this helps

    How do you replace a burnt headlight bulb on a Chrysler LHS '97?

    BEFORE YOU ANSWER: If you have not personally fixed the *front, drivers side headlight* on a Chrysler LHS '97,I do NOT want you to answer. Not all headlights are the same, which is why I'm having problems fixing it.



    My front, drives side headlight is burnt out. When I opened the hood, there is no apparent way to easily change the bulb.

    A friend of mine said that it would be necessary to remove the front bumper to change the headlight.

    Another friend of mine said it would be necessary to remove the battery and the battery mount to reach behind and change the bulb.

    I do not know if either of them are correct. I tried to search Google but could not find information that helped. I do not want to take it to a shop, because out of the 3 shops I called, none of them could tell me how to fix it over the phone- and that I would receive an estimate of how much labor cost after the light was fixed.How do you replace a burnt headlight bulb on a Chrysler LHS '97?The front bumper must be removed first then the headlamp can come out and then you can swap out the bulb. You may have to remove the airbox.How do you replace a burnt headlight bulb on a Chrysler LHS '97?You go girl! LOL You know exactly what you want for sure.



    AutoZone has manuals online Go there and register. Add your car and you can look up vehicle repair information. Lighting is under chassis electrical.



    I just checked and they have 5 or 6 photos on how to dlibrary'sll librarys have auto repair manuals on the shelves or on line too.



    Go fix that light. And say thank you once and a while.

    How do i change the headlight bulbs on a 2005 dodge durango?

    what tools would i need to complete the taskHow do i change the headlight bulbs on a 2005 dodge durango?You should need new bulbs, and your fingers. Don't touch the glas parts of the bulb though. It is VERY easy. Have fun.

    How do you change a low beam headlight bulb in a 2005 Acura MDX?

    I haven't been able to find much info online, and there is no way I'm paying the dealership to do this. I suppose I could go outside and mess around with the light until I figure it out, but I live in MI and it's so COLD out there! :o) I'd rather go out knowing exactly what I'm doing first! Thanks for your help!How do you change a low beam headlight bulb in a 2005 Acura MDX?auto zone or advance will change the bulb for you free if you buy it off of them.How do you change a low beam headlight bulb in a 2005 Acura MDX?go to parts store buy bulb they will show you how to change it....put no finger prints on bulb wear gloves...behind lense has big black collar unscrew remove old bulb insert new reinstall bulb and collar let the parts guy show you it makes it even easier for the first timeHow do you change a low beam headlight bulb in a 2005 Acura MDX?take to auto zone they change if free for you buy the bulb there

    How easy is it to change a Ford Focus headlight bulb?

    Off to do one tom, any tips?How easy is it to change a Ford Focus headlight bulb?Very easyHow easy is it to change a Ford Focus headlight bulb?Its only a light job
  • cook fresh salmon
  • DSL Internet / Router problem
  • How do you change the passenger side headlight bulb on a 2003 Chevy S-10?

    I removed the battery, yet I can't find a way to get to the bulb.How do you change the passenger side headlight bulb on a 2003 Chevy S-10?you will probably have to take the complete headlight assembly out or at least loosen it to be able to get to the bulb.How do you change the passenger side headlight bulb on a 2003 Chevy S-10?look closer, you should be able to grad ahold of the back of the headlight twist is a quarter turn and pull it out, sometimes there is a ring around the back of it that you have to unscrew.

    Change the headlight bulbs on a 2002 Nissan Altima?

    I am not very knowledgeable when it comes to cars. I need to replace the bulbs for my headlights. The Nissan manual says to take it to the dealer. How much would they charge for something like that? Is it easier to do it myself without breaking something else? It looks like you have to move certain pieces to get to the light? Any advice from someone who knows about this car%26gt;Change the headlight bulbs on a 2002 Nissan Altima?1. You need to find the size for your car (check here http://www.sylvania.com/ConsumerProducts

    2. If installing it yourself, make sure you wear gloves and DO NOT touch the bulbs with your fingers if you're not wearing gloves.

    3. It's pretty simple, just take out the plug that connects to the bulbs, then take the bulbs out carefully and replace and plug back in.Change the headlight bulbs on a 2002 Nissan Altima?Actually first couple of years Altima's had a Grounding issue reacall. NTB05-057 %26quot; PB135 %26quot; Please get you car back to the dealer to catch up with the recalls and service campaigns. I am just guessing here it is the low beam light(s) that are not working. High beam lamps are harder to change. With a little luck you may end up with a new headlight assembly.

    On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?

    Do I remove the headlight assembly to change it , if so how? Is it accessed some other way?On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?yes open the hood and the assembly should have 2 white or black plastic clips on it. Pull the clips up and the assembly should come right out.On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?no pop your hood and do it from the inside

    How much does it cost to change the headlight bulbs on a 2001 Volvo S80?

    I work at a Volvo dealership and we don't charge any labor for light bulbs.How much does it cost to change the headlight bulbs on a 2001 Volvo S80?ok, it should not be more than $15.00 according to autozone.com. You might be able to get it for less than that if you do not mind shopping at Wal-Mart.



    Here is the link:



    http://www.autozone.com/selectedZip,4819



    hope that helps



    Hamada



    Well for Labor, yes that is fair, considering it should not take more than 15 minutes (maybe even less than 5 minutes). At that rate your hourly rate would be at least 40/Hr. Now is that fair? Sure a garage station would charge him at least double, but they have expenses too. So make the whole thing for $25 for parts and labor.



    Hope that helpsHow much does it cost to change the headlight bulbs on a 2001 Volvo S80?I think if I were doing it for my boss, I would not charge anything for the labor. Let him pay for the parts, but it never hurts to do a favor for the boss.How much does it cost to change the headlight bulbs on a 2001 Volvo S80?Bulbs are about $20.00 to $25.00 each. Dealerships usually have two different labor rates, they charge a lower labor rate for easy things such as bulbs, or a battery, or an oil change, menu pricing i guess you could call it. Anyways I'm a dealership volvo tech and two headlights parts and labor should run about $75.00. Of course different areas of the country have varying prices i'm sure.

    How do I change the headlight on a 2003 mini cooper?

    So I was at the grocery store tonight and when I got back in my car the headlight went out. I don't want to buy a complete headlamp and I have looked to see where I can buy only the bulb, but where can I find information on how to change the bulb once I buy it, or will the bulb come with instructions on how to insert it?How do I change the headlight on a 2003 mini cooper?What kind of lighting do you have, Halogen or Xenon?



    If you go here: http://www.realoem.com/bmw/select.do and enter the requested information, you can find exploded views of your car's headlight assemblies.



    The Bentley Publications %26quot;Complete Official Mini Cooper%26quot; manual is invaluable if you plan to do much of your own work on the car. Amazon has the best price. It's a factory workshop manual.



    The forums at NAM are also great: http://www.northamericanmotoring.com/for
  • cute hair
  • chaep web hosts
  • I need to change the headlight bulb on a 2002 mercury cougar, can someone please explain how to replace.?

    go to your mercury dealer they know how to do it so you dont need to worry about itI need to change the headlight bulb on a 2002 mercury cougar, can someone please explain how to replace.?Check and make sure you are getting the right bulb at a parts store when you buy it. Your car probably uses a H9007 or a H9004 bulb. You have what is called %26quot;composite headlights.%26quot; That means the lense is one part and the bulb is replaceable from the back. You might be able to reach the bulb from the back of the housing. All you do is open the hood and look behind the back part that the lense is mounted to. There should be a pigtail that plugs into the back of the bulb. There is a plastic retaining ring that holds in the bulb. The way I take out the bulb is to turn the ring and remove the bulb, ring, and pigtail all at the same time. Then I pull the pigtail off of the bulb and discard it. Install the bulb in the hole in the back of the headlight assembly taking care not to touch the glass part of the bulb. Touching it will cause it to blow out within 2 weeks. If you touch it just wipe it off with a paper towel soaked in alcohol to remove the finger oils. After it is in the hole and seated, (the little tab that the pigtail locks onto should be on top,) put the plastic retaining ring on and turn it to lock it into place. Plug the pigtail back into the back of the bulb.I need to change the headlight bulb on a 2002 mercury cougar, can someone please explain how to replace.?pop the hood look behind the blowmn bulb. twist the base counter-clockwise and pull. the bulb should come out. pull the bulb straight out. then reverse the steps to replace.I need to change the headlight bulb on a 2002 mercury cougar, can someone please explain how to replace.?Instructions are found on page 52 of the owners manual....



    oops no owners manual?



    https://www.fleet.ford.com/ click on maintainace then owners manual



    or click here:

    https://web.msslib.dealerconnection.com/

    How the heck do you change the driverside headlight bulb on a 2003 Ford Focus? tried to but it won't come out?

    not matter how hard I pull or turn.How the heck do you change the driverside headlight bulb on a 2003 Ford Focus? tried to but it won't come out?First you must push it in and turn the connector ,then you pull it out. When you go to put it back in be sure to match the notches up ,some are wider then the other ones.How the heck do you change the driverside headlight bulb on a 2003 Ford Focus? tried to but it won't come out?the assembly might have to come out. turn the nut off and pull out the light.How the heck do you change the driverside headlight bulb on a 2003 Ford Focus? tried to but it won't come out?ditto what handyman said.How the heck do you change the driverside headlight bulb on a 2003 Ford Focus? tried to but it won't come out?Just rip it out like I did :~) haha. Your going to have to take the headlight assembly out

    How do you reinstall headlight bulb on Mitsubishi galant 99?

    changed bulb at night long time ago. yes i know this was a mistake. don't know how clip is supposed to be any ideas or websites that have a diagram? thanksHow do you reinstall headlight bulb on Mitsubishi galant 99?Haynes on line,but i would try again.

    How to change the bulb and aim a 97 Buick Skylark Headlight?

    My right headlight is burnt out. I need to know how to change the bulb. But most importantly I need to know how to aim the light.How to change the bulb and aim a 97 Buick Skylark Headlight?There is trim aroung the headlight, it needs to come off, unscrew the chrome ring around the headlight, it should pop out( the headlight) install the new one, attach the trim ring, put the trim around the headlight and the job is done, no need for adjusting it. GOOD LUCK

    How Do I Change The Headlight Bulbs on '03 Ford Explorer?

    Actually, it'sm an '03 Mountaineer. I but new bulbs. It it a do-it-yourself job, or do I need to go to the dealer? If I can do it, how do I do so?How Do I Change The Headlight Bulbs on '03 Ford Explorer?You can do it your self. Open the hood and look at the back of the light. Turn locking ring counter clockwise and slide it back on the wires. Then just pull the bulb out and un plug it. When you put the new one in make sure you don't touch the glass bulb with your fingers when reinstalling it. Oils on your hands getting on the bulb can cause the bulb to fail pre- maturely. Reverse procedure for installation
  • how to get online with ps2
  • ingrown toe nail
  • How do I change the headlight bulbs on a 97 chevy blazer?

    i just got 2 bulbs, and have absolutely no idea how to get down into the back of the lamp. i opened the hood and i think i need to take off the grill but when i take off all of the bolts, it still stays in place. what do i do??????How do I change the headlight bulbs on a 97 chevy blazer?the whole big thing comes out. unscrews, then unsnapsHow do I change the headlight bulbs on a 97 chevy blazer?Im not sure what the headlight looks like from the view under the hood, but in my 03 tahoe, you have to move one prong to the left and one prong to the right then the bulb can be removed.

    How do you change a headlight bulb in a 2004 Chevy Malibu Maxx?

    I looked it up on WikiAnswers, and it said to pull on tabs on either side of headlight assembly. I am not finding these tabs. I don't know if they look different from what I expect them to look like or what. I don't want to take it to Goodyear and pay 8 bucks for them to do it. I have the bulbs, but no idea how to get the old bulb out. I've don't it before on my old car, but this car is so much different.How do you change a headlight bulb in a 2004 Chevy Malibu Maxx?Open the hood and look down behind the headlamp. From memory there is a circular 'cap' over the back of the headlamp that you need to twist off, this should allow you access to the bulbs.How do you change a headlight bulb in a 2004 Chevy Malibu Maxx?It takes 3 monkeys. 1 to change it, and 2 to throw feces at each other.How do you change a headlight bulb in a 2004 Chevy Malibu Maxx?Pull out old bulb, put in new bulb.

    How do i change the headlight bulb on a 1995 nissan altima?

    its not my car, its my friends and he needs it replaced ..im not familiar with nissans, i am a chevy guy ...



    i have replaced many headlight bulbs before but i just want to know what im going to be dealing with .. any comments/suggestions/special things i need to do on how to replace this bulb in this car ?



    i dont know if its on the drivers or passengers side yet i forgot to ask, and the other side is probably going to go out soon any way, so if you can tell me how to do it on both sides, that would be great



    if you know a site that has pictures of this, that would be even better, but if you dont have any pics thats ok



    thanks in advanceHow do i change the headlight bulb on a 1995 nissan altima?If have ever change a bulb before, no problem it will be piece of cake. Pull from behind the replacement bulb, many times just need to turn counterclock and disconect the conexxion. Place the new one and turn in the opposite direction. And that s it turn the lights on

    How do you change the headlight bulb in a 2004 Subaru Impreza?

    My passenger headlight burned out and I would like to replace the bulb myself.

    Does anyone have a link to instructions on how to replace the headlight bulbs? Do I need to remove any major body panels to access the bulbs? What kind of headlight bulbs does the 2004 Impreza take?How do you change the headlight bulb in a 2004 Subaru Impreza?Remove whatever parts will allow you access to the rear of the headlight housings. There is usually a retaining ring that needs to be turned to allow the bulbs to be removed from the housings.



    When installing the new bulbs, be sure not to touch the glass. Any skin oil or contaminants on the glass will cause it to overheat and render the bulb defective.How do you change the headlight bulb in a 2004 Subaru Impreza?It's that simple!



    Opened up the hood. Pull the headlight cable of the burned out bulb. Remove the rubber covering. Then press the clip that holds the bulb and pull it out. Replace with new bulb. Assemble back accordingly, but remember not to touch the glass with bare hand. BTW have it replace with H 12V - 55W/60W bulb. There you are!

    Does anyone know how to change the headlight bulbs on a 2001 Chevy Cavalier ?

    The owners manual says something about removing a clip that holds the turn signal assembly to the headlight assembly and then the headlight assembly will come out , I don't see any clip. Thanks for your help..Does anyone know how to change the headlight bulbs on a 2001 Chevy Cavalier ?Sorry, I'm not seeing anything about a clip myself.

    For either the Headlamps or Front Park and Turn Signal Lamps



    1. To remove the six plastic fasteners from the shield use a screwdriver to pull up the center of the fastener. Be careful not to break the fasteners that hold the shield in place.

    2. Using a 13 mm socket, remove the two bolts from the headlamp. Pull the headlamp assembly up and toward the front of the vehicle to access the bulb assembly.

    When replacing the driver檚 side headlamp, twist the bulb assembly one-eighth turn counterclockwise and remove it from the headlamp assembly. When replacing the passenger檚 side headlamp, twist the bulb assembly one-eighth turn clockwise and remove it from the headlamp assembly.

    3. Disconnect the bulb base from the socket by lifting the plastic locking tab.

    4. Remove the black collar by turning it counterclockwise.

    5. Remove the bulb by pulling the bulb straight out.

    6. Snap a new bulb into the socket.

    7. Reinstall the bulb assembly by reversing Steps 1 through 3, making sure the lower leg of the headlamp bracket is properly seated into the wedge-shaped retainer.

    Does anyone know how to change the headlight bulbs on a 2001 Chevy Cavalier ?Thanks for the pull up and out part....I couldn't get it out until I tried that. The manual gives you some hoopla about finding somekind of release with a screwdriver.

    Report Abuse

    Does anyone know how to change the headlight bulbs on a 2001 Chevy Cavalier ?autozone will install most for free, providing you buy it there
  • bios error beep
  • female molly
  • How do I change the headlight bulbs on a 1999 Grand Prix GTP?

    It doesn't seem like there's easy access to the bulbs, so wondering what the best approach would be. I also noticed condensation inside the assembly so would like to get that cleaned up as well. Any help would be great!How do I change the headlight bulbs on a 1999 Grand Prix GTP?The newer filament types are accessable from the back and alot of times are not easy due to wiring and tight quaters. Once you have that removed, use a blow dryer on low and blow into the hole for a few minutes to dry out the condensation.How do I change the headlight bulbs on a 1999 Grand Prix GTP?you have to take the complete light loose to be able to get to the bulbs and as far as the condensation you will have to replace the whole light assembly as the light doesn't come apart.How do I change the headlight bulbs on a 1999 Grand Prix GTP?GM came out with a revised part for replacing the headlamps and turn signals. They were notorious For condensation, so they revised it. Use a blow drier on cool to get rid of condensation.

    Is it necessary to reinstall the metal wire/clip "thingy" when changing headlight bulb in '03 Hyundai Elantra?

    Today I changed the passenger-side headlight bulb in my 2003 hyundai elantra. in order to access the socket for the bulb, i had to remove this weirdly-shaped wire that was helping to hold the socket in place. i now don't know how to replace the wire thing, because its shape is kind of confusing and i can't see into the bulb housing well enough to figure it out. i also can't look at the driver's side to see how that one is held in, because of this plate that restricts my access to it.

    i don't have a manual, and can't find diagrams online.

    could someone describe how to put the wire in? or is it even necessary to do this? the screw-off cover to the lightbulb is in place, will that hold it in securely enough?Is it necessary to reinstall the metal wire/clip %26quot;thingy%26quot; when changing headlight bulb in '03 Hyundai Elantra?Yes, you have to.

    Mines a 2005 and it was a PITA to even get it off but you put it in what looks like sideways. I *believe* the curcey part goes in at the left and the part with prongs goes in at the right. You just have to squeeze the little prong things a little to get them to go into where they go.

    Fiddle with it and you'll figure it out :-)Is it necessary to reinstall the metal wire/clip %26quot;thingy%26quot; when changing headlight bulb in '03 Hyundai Elantra?not 100% sure as there are different retainer clips for different cars. some will go from the bottom to top and some will go from one side to the other, i suggest take it to a mechanic or even a auto retail store and have them fit it, im sure they could`nt expect for you to pay anything for fitting it.Is it necessary to reinstall the metal wire/clip %26quot;thingy%26quot; when changing headlight bulb in '03 Hyundai Elantra?It is necessary to install this %26quot;retaining%26quot; clip for it holds the bulb in place. And it is essential, seeing as how expensive the bulb is. The clip goes in at a wierd angle. Just got to work at it. Sorry.Is it necessary to reinstall the metal wire/clip %26quot;thingy%26quot; when changing headlight bulb in '03 Hyundai Elantra?Ash,

    THats right, its a MAJOR PITA to change these out. Not only does one have minimal space to stick one's mitts in there, but that wire retainer takes a gawdawful amount of time to get back in. You're not alone! Its a stupid design, but you have to get used to it. Try taking a look at the other side to visualize the position of the goofy little clip. Yes, it must be re-installed to keep the bulb in place.

    I have a 2002 Elantra, and have gone down the same path of discovery as you. As time goes on you'll get better at it.



    lee

    How to change a headlight?

    I need to change my headlight bulb on my 1999 Oldsmobile Alero. I got the bulb but it didn't come with instructions. So if anyone can help that would be great. Thanks everyone.How to change a headlight?The bulb you picked up should be a 9006, This bulb is changed from under the hood. Go to the side that is burned out and unplug the three wire connector, you will have to push back a lock tab to do this. Then unscrew the ring that holds the bulb into the composite headlamp assembly. Don't touch the glass of the new bulb, If you do, clean it with a aolchol wipe. Push your new bulb in (It will only go in one way) screw on the ring and reconnect the wiresHow to change a headlight?check the owners manual. if you dont have one lift up the hood and look behind the headlight you should see where the plug is going into the housing. Normally it take just a little turn and it will pop out. then change the bulb, put light back in the housing and close hood. all doneHow to change a headlight?Open hood and dislocate the plastic cover over the headlamp. Then pry the lock tab on the electrical connector up a little, but don't break it. Then unscrew the holder or depress and rotate the holder depending on what type you have and the bulb just pops out.

    How do you change the headlight bulbs on a Toyota Starlet (1996)?

    There doesn't seem to be a normal way in so am thinking I would have to remove the complete headlight to get in. Obviously keen to avoid that.How do you change the headlight bulbs on a Toyota Starlet (1996)?On that age of car it may be a sealed beam unit?Not that common now a days?But if once the wiring plug is pulled off there is no bulb retainer/clip,then it a complete unit I think?

    How to you change a headlight bulb on a 2003 passat?

    open the hood, on the back of the headlight assembly, there is a plastic cover, retained by a plastic clip, carefully remove this cover, then unplug the back of the light, remove the retention ring by turning it about 30 degrees, remove the bulb. install is reverse, but be careful not to touch the glass of the bulb with your fingers, as it will burn it out a lot sooner.
  • DSL Internet / Router problem
  • hair dresser
  • Can anyone give me instructions on how to change a headlight bulb on a 2001 lexus es 300?

    You dont. Take it to a Lexus dealer. This car has xenon headlamps, messing with them leads to death. No, not pain, death.

    DYI Question...Do anyone know how to change a headlight bulb on a 2000 BMW 528i?

    Or could you direct me to a site that gives instructions....



    Thank you.DYI Question...Do anyone know how to change a headlight bulb on a 2000 BMW 528i?This is very easy. No tools are required. Open the hood and look at the back of the headlight. Turn the socket which is connected to the wire to the left. Then pull it straight out after it turns. Take the bulb out of the socket by turning the bulb to the left. Take the new bulb and push it into the socket and turn it to the right. Put a piece of cloth over the bulb so that you do not touch it.( Any oil from your hands will cause hot spots on the bulb and it will burn out sooner) Then put the socket back into the light assembly and turn it to the right. That is it.DYI Question...Do anyone know how to change a headlight bulb on a 2000 BMW 528i?There should be a srew you can get to through the grill using a philips head screw driver.



    Tom

    How to change the headlight bulb on a mazda miata?

    For the 01-05 just need to:

    1. open the hood.

    2. locate the back of the headlight assembly.

    3. turn the connector of the bulb your trying to replace counter clockwise and pull straight out of headlight assembly.

    4. pull bad bulb straight out of socket and push new bulb in socket.

    5. put socket with new bulb back into the headlight assembly and turn it clock wise.

    6. turn on lights to make sure they work.

    7. if work, close hood.

    7. done!How to change the headlight bulb on a mazda miata?If its still got the Japanese originals they may be sealed beam headlamps. Then the only solution is to fit new lamp units with H4 bulbs. Loads out there but the brightest seem to be made by Raybrig. Any of the MX5 specialist suppliers will have what you needHow to change the headlight bulb on a mazda miata?If your car is between 90-97, you have the pop up headlights and they come with seal beam headlight, meaning if they go out you gave to buy the whole headlight not just the bulb. Check out www.miata.net and go to garage section, you will tons of info about miata including changing headlights.How to change the headlight bulb on a mazda miata?pop up or fixed headlights?

    How do you replace the headlight bulb on a renault clio 2004 model?

    I have a renault clio 04 plate and i wondered how do you change the headlight bulb on the drivers side, mines stopped working and i dont want to take it to a mechanic just for that.How do you replace the headlight bulb on a renault clio 2004 model?You remove the rubber boot from the back of the headlamp.



    The bulb is released by twisting it clockwise (looking at it from the back of the light unit).

    Once released the bulb will need to be pulled quite firmly to release it.

    The new bulb the needs to be plugged into the holder, with out touching the glass on the bulb.

    Once it is plugged back in to the bulb holder, it is fitted back into the headlight by iserting it back in to position and twisting the bulb holder anti-clockwise.



    They can be a bit tricky on these clio, especially if it has air con. You may find that you will keep scratching yourself on a black clip that holds a pipe in position on the inner wing.

    This clip can carefully be removed if you need too.



    Renault specify removal of the front bumper to replace the headlight bulb on this model of the clio, but it is possible to do without removing it.How do you replace the headlight bulb on a renault clio 2004 model?When it's parked?



    Could be messy otherwise!How do you replace the headlight bulb on a renault clio 2004 model?You do not have to take it to a mechanic. I took my Toyota to the dealtership. They charged me $182 for doing that. I was so shocked. Then my brother told me to take my 2001 Toyota when the headlight bulb burned out to Auto Zone. The guys there are so helpful and will change it for you. Cost to me $13.23. I love Auto Zone. If you do not have one, go to another auto parts store and ask if they can help you.How do you replace the headlight bulb on a renault clio 2004 model?You need to get in touch with ET .H e is anElectrical Therapist who specializes in changing light bulbs in renaults.Or just remove the big plastic part on the back of the light and this will let you gain access to the offending bulb which has to be replaced.It has a small clip to retain it which has to be unclipped to allow the bulb to be removed.How do you replace the headlight bulb on a renault clio 2004 model?To a garage, they charged me only for the bulb, not for replacing it, 5.How do you replace the headlight bulb on a renault clio 2004 model?Well the easiest way is to first find out the type of bulb needed. Is it a high beam or a low beam blub that is out? You can simply find out by checking your owner's manual. It should tell you exactly what type of bulb you need AND how to replace it. [How I changed my headlight bulbs on my 07 Accord and saved big $$$]



    Also, some headlight lamps [the whole compartment] have small little letters written such as HB3, HB4, or HB5 [it should be written in clear font at the bottom edge of the lamp assembly, right below the corresponding bulb].



    Most bulbs can be found at local automotive stores for really cheap. If you want quality, be willing to spend 15-30$. Sylvania is a good company. [If you only change one bulb, make sure you get the same color rating, halogen bulbs operate at different temperatures producing different colored lights.] This is the reason why you see blue head lights on some cars. If you replace one bulb, I suggest you replace the same corresponding bulb on your passenger head light assembly as well. Otherwise you might end up with one very bright light while the other lamp only produces half the amount of light.How do you replace the headlight bulb on a renault clio 2004 model?Why not every other lazy sod does, why not take the pi$$ like every other does?

    How do you change the headlight bulbs on a 97 cavalier?

    I cant seem to find a way to get at the back side of the headlights to switch the bulb... Do i need to take out the whole headlight assembly? If I do how do i do that?How do you change the headlight bulbs on a 97 cavalier?The headlamp assemby does need to be removed. There may be some plastic wing nuts on top or they may be the 10mm bolts.

    They are usually on the metal cross member behind the head lamps. Then the bulb is just a twist to the left and pull. There may also be a small plastic lock tab preventing the bulb socket to turn.
  • hair remover
  • transferring ipod form 2 computers
  • How can i change a dead headlight bulb specifically on a 93 acura integra?

    on headlamp is out, but the brights still work. tried to do it myself, but when i tried to get the bulb out from the car, it bulb holder wouldn't budge to come out, only the electrical plug to it. im thinking to take it to a place such as jiffy lube. how much would this cost? it seems like an easy doit yourself fix though. advance thanks for any helpHow can i change a dead headlight bulb specifically on a 93 acura integra?You'll need to remove the bulb from behind the headlight. You can do this by taking the fan shroud off and removing the bulbs from the wire harness.



    There is a retaining ring on the backside and you usually twist it to get it loose. If you take it to auto zone or someplace like that they will probably do it for free.

    I am trying to change the headlight bulb on a 2001 Mitsubishi galant but the connector will not come off. WHY

    I have a repair book that says it should just slide off but it is not doing so. Is there some hidden clips holding it to the bulb contacts?? if so how do i get in there to release the clips??/I am trying to change the headlight bulb on a 2001 Mitsubishi galant but the connector will not come off. WHYif you,ll look at it,,you,ll see a small clip that pulls up,,use a small screwdriver for this and lightly pull on it ,,then it will release some of these are stubborn to get off,good luck,hope this help,s.,,have a good x-mas.I am trying to change the headlight bulb on a 2001 Mitsubishi galant but the connector will not come off. WHYsome cars has a ring,you have to turn off,before the bulb can come out.

    Does anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?

    You have a choice, either:

    Take out the little grill below the windscreen to gain access to the back of the headlight. Then you reach in and remove the old bulb and replace. Unfortunately, you will need to break your arm in 3 places and grow fingers 2 feet long to do this easily as you will be working blind, at full stretch in a very confined space. So for the next time I did one I used option 2 which is:

    Remove the entire front panel of the car, remove the headlight, change the bulb, and refit the front panel. This sounds ridiculous, but it's dead easy and takes about 20 minutes as opposed to 2.5 hours of fiddling.



    To remove the front panel:

    unscrew and remove the arial for the radio.

    Remove the door mirrors (3 torx screws each from inside the car) and let the mirrors hang.

    remove the little silver grill (may have fog lights) - this achieved with a small screwdriver that can be used to release 5(?) plastic clips moulded into the grill that hold it in place.

    Behind where you have removed the little grill you will see 2 further torx screws that need to come out (1 on each side).

    Open the driver and passenger doors, you will see approximately 5 torx screws (on each side) that you need to take out to release the front panel.

    Lift off the front panel carefully, gently unplugging the indicator repeaters as you do it.



    Headlight is simply screwed into place with all screws visible.



    And as the Haynes manual would no doubt say %26quot;refitting is the reversal of removal%26quot;



    Have fun! (or you could take it to the garage!)Does anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?I don't think its necessary to remove the front. I did it this morning in 10 minutes: http://www.evilution.co.uk/295 - In addition, use a vanity mirror and a flashlight to size it up. The key is knowing how the m-brackets are clipped in. I even fixed a mistake that was made by the dealer.

    Report Abuse

    Does anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?Yes...buy a new car for the bulbDoes anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?HahahahaDoes anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?Thought the car was a SMART Car.....if its that smart should be able to do it itselfDoes anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?google itDoes anyone know how to change a headlight bulb in a smart car. It is an 03 four two.?Yes, I do. As per the manual you take it to a Smart garage (I've had two done) the reason being that you have to access it via one of the access vents, which are very small, and you can't actually see what you're doing. Alternatively you can remove the entire front panel. Whichever you do replace both. I didn't and 10 days later the 2nd one blew!

    2005 Maxima headlight bulb change?

    THIS IS A NON-HID!!! HAS 9012 HIR BULBS!! I already know how to get to the bulb. I have the gray cup.. housing.. protector thing off the back of the light. My question is about the gray ring over the bulb. Does that come off to pull the bulb or does the bulb turn and come out through the slots in the gray ring? I don't want to break anything, any hints?

    Thanks2005 Maxima headlight bulb change?You have to turn the gray ring. It's a locking ring so turn it till it releases then pull the bulb and it will come out. Place the new bulb in and then replace the ring and all the parts removed

    How do you remove the headlight housing to change a turn signal bulb in a ford focus?

    I've removed the two screws on top, but the black casing won't move so I can get between it and the lights to change the bulb.How do you remove the headlight housing to change a turn signal bulb in a ford focus?There must be a third *extended hex bolt buried down inside the headlight housing. It's there you just have to find it. Wish I could help ya! You've got the right idea as the entire headlight housing has to drop out to service the headlights and turn signals.



    If you really get stuck, go to a library and look up your specific model car in a Motors or Chilton's *big thick book.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Hi, The cover should pullout enough to get at the bulb.Please go to the web site (ehow.com) and put in search for how to change front turn signal light for Ford focus. It will give you step by step directions .Good Luck.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Check your owner's manual. It may show you how to do that and where your missing screw is.
  • Will giving my 6 week old
  • bombay computer advice
  • How do I change the headlight bulbs on my Vauxhall Corsa?

    I have an L Reg 1994 Vauxhall Corsa.

    Can anyone tell me how to change the bulbs in the headlights?

    Thank You :)How do I change the headlight bulbs on my Vauxhall Corsa?To change the headlight bulbs, you need to disconnect the multiplug on the back of the bulb first. These just pull off but are ridiculously tight (don't pull too hard because the headlamp mounting clip will shatter and the headlamp will flop about). Try to hold the bulb itself while you pull this off (squeeze the bulb through the rubber cover surrounding it). Once disconnected, remove the rubber cover.

    The last step is to move the wire clip that holds the bulb. You should see two bent wire rings above the bulb, push in and to one side to unhook and then the bulb drops out. The bulb will only go in one way so make sure the locating tags are the right way up (large tag to the top). Don't touch the glass of the bulb with your fingers as it will shorten its life.



    If the mounting clip breaks, they cost very little from a Vauxhall dealer and just need the headlamp removing to replace them.How do I change the headlight bulbs on my Vauxhall Corsa?your new cars under the hood you have two locks u pinch both at once and twist counter clockwise to unlock then bulb should just pull out use a rag on the new ones to keep clean oil from your fingers can blow the new one when it gets hot

    How to change headlights bulb on a isuzu trooper?

    Most likely if the headlight housing does not come apart, then you have to get whole new lights. I had to do the same on my Isuzu truck.

    How to change Volkswagen GTI headlight bulb?

    I own a 2000 GTI, and I want to replace the headlight bulbs with brighter ones. I was going to get Silvania Ultras, but are there any nice white and bright bulbs that you recommend that are not too pricy? Anyway, I looked under the hood, and there is a cover that comes off to access the bulbs. The bulb and wire are held in with like a thin metal wire clip. I was wondering how to remove the clip so I can get at the bulb. ThanksHow to change Volkswagen GTI headlight bulb?It's hard to explain over the internet. That wire clip is almost like a spring. You have to %26quot;bend%26quot; it around part of the housing holding the clip on. You really just have to get in there and take a look at it. Play around with the metal piece and you'll see.

    GOod luck :)!

    Does anyone know how to change headlight bulbs on a bmw?

    I have a 2000 BMW 323iDoes anyone know how to change headlight bulbs on a bmw?I just changed it myself and it's relatively easy. Look for the gray part and twist it counterclockwise. Don't twist the light bulbs or the wires but almost the whole thing. It should come out easy. Be careful taking it out if it was recently on because it's going to be hot. If it's broken then never mind it and wiggle it out. Insert the new headlight bulbs but don't touch the glass because you will decrease the life of the bulb. Make sure you don't lose the rubber seal on the way in because that'll get some water in possibly burning it out or fogging up the headlight hence decreasing visibility. You should be good to go.Does anyone know how to change headlight bulbs on a bmw?You need to open your hood. and behind each headlight, you'll find either, a cover that you'll have to twist off to get to the headlights, or, you'll find the bulbs right away. you'll have to twist the bulbs out once you get to it, and pull them out, and then unhook it from the plug. and replace them. You can buy bulbs for like $10 at any car accessory store, Pepboys, Autozone, CAP, NAPA, etc..

    How do u change a headlight bulb?

    on a 2002 ford f150. What do u have to remove to get to the bulb?How do u change a headlight bulb?May have to remove the battery, depending on which side the bulb has failed. Once you have located the rear of the head light, there is a large round black plastic lock ring. Turn to the left 陆 a turn. Remove the bulb. When handling the new bulb, DO NOT touch the glass with your bare hands. Install the bulb in the rear of the light. Install lock ring.



    禄禄禄
  • how does a toner video tape works
  • windows media player
  • How to Change '05 Dodge Dakota Headlight Bulb?

    I have a 2005 Dodge Dakota, and I bought some HID Xenon bulbs. It was used and didn't come with a manual, and I have no idea how to change the bulbs out.How to Change '05 Dodge Dakota Headlight Bulb?You can download a PDF copy of your Owner's Manual here;

    http://www.dodge.com/en/owners/manuals/i



    As it shows, starting on page 330, you have to remove the headlamp assembly from the body to access the bulb from behind it.How to Change '05 Dodge Dakota Headlight Bulb?Inside the engine compartment you can gain access to the back of the head light bulbs. There you will see a plastic holder that twists to remove. look close with a flash light and it will have directional arrows to aid in removal. Once out, remove old bulb and with out touching the glass area of the new bulb, reinstall the new bulb. The body oil from your hands can cause the light to fail prematurely due to the Extreme heat generated by the bulb. Good Luck

    How to change the headlight bulbs from a 2001 Jaguar S Type 3.0 ?

    i need a step by step guide to change the bulbs.How to change the headlight bulbs from a 2001 Jaguar S Type 3.0 ?You can google this fro sure.

    How do I change the headlight bulbs on a 2005 scion tc?

    I tried googling and could only find a diy involving removing the entire headlamp so that didn't help. I just need to change the bulbsHow do I change the headlight bulbs on a 2005 scion tc?Have a look in Chilton's Auto Repair manual at the public library if you want to get the whole story with pictures. Xerox what you need to take home.How do I change the headlight bulbs on a 2005 scion tc?I'm not certain about your model, but most newer cars have headlamp access by opening the hood and reaching in behind the headlight housing. DO NOT touch the replacement bulb with your bare fingers. The oil on your skin will make it overheat and burn out prematurely.How do I change the headlight bulbs on a 2005 scion tc?Just remove the plastinc wing nuts on the back of the light for access....

    1995 Isuzu Rodeo how to change the headlight bulb?

    There are wires over the bulb end that sticks out the back that don't seem to want to be unattached. They seem to be pressure-fit but won't pop away. Otherwise the setup seems the same as my old Ford Escort... twist the bulb casing and pull it out, stick the new bulb in and twist. At this point I have one headlight dead and the new bulbs are on the dashboard waiting for a cop to stop me and see if he can figure it out :-)1995 Isuzu Rodeo how to change the headlight bulb?Just make sure that no one touches the actual bulb.. or it will not last very long.1995 Isuzu Rodeo how to change the headlight bulb?Pop hood unscrew from the inside, I have the same car.1995 Isuzu Rodeo how to change the headlight bulb?Drive to your local Auto-Zone store.. Buy a bulb and ask the counter guy to install it for you... No prob.